HOTLINE: 0976573315
Mold Temp. Control Unit
Model: MTO / MTW series 
Thương hiệu: MITEX
Xuất xứ: CHINA
Bảo hành: 1 năm
Giao hàng: Liên hệ
Giá (chưa bao gồm V.A.T): Liên hệ
   

 

Chi tiết

 

       MTW series temperature control unit   

       This unit is designed for water operation up to maximum 120oC. 

        Features: 

  • Self-optimizing microprocessor controller with digital display of set and actual temperature.
  • The module design is compact,economical,efficient and basically maintenance free.
  • Automatic water drain when change the mould as option function.
  • Complete with safety protection and error indication system.
  • Rapid heating and cool off speeds, temperature is kept stable at all time..
  • All pipeline in touch with water are made of stainless steel .

 

        SAFETY PROTECTING AND INDICATION SYSTEM 

  • Power source phase deficient protection
  • Circuit breaker
  • Pump reversal protecting and indicating lamp
  • Pump over load protecting and indicating lamp
  • Water shortage protecting and indicating lamp
  • Over heat protecting and indicating lamp
  • By-pass pressure lose circuit
  • Cooling compulsory
  • Temperature deviation alarm and indicating lamp
  • Break down alarm buzzer

 

       ADDITIONAL EQUIPMENT FOR OPTION 

  • Thermocouple to connect to outside wiring
  • Large type of water filter
  • Protection switch for prove the electric leakage
  • Protection switch for prove the abnormal voltage
  • Teflon hose

    MTO series Oil Temperature controller

This unit is designed to operation for oil operation maximum to 200℃.

           Features

  • Self-optimizing microprocessor controller with digital display of set and actual temperature. 
  • The Moduler design is compact, economical, efficient and basically maintenance free.
  • Complete with safety protection and error indication system.
  • Hot water piping is single unit design extended to 4 inlet and 4 outlet separation tubes to avoid leakage.
  • Rapid heating and cooling. Temperature kept stable at all times.
  • Automatic water drain when change the mould as option function. 
  • SPECIFICATION

     

    MODEL
    MTO-TS2010
    MTO-TS2020
    MTW-TS1210
    MTW-TS1220
    Power supply
    AC220~380V50/60HZ
    Max. working temp℃
    200
    120
    Min. working temp℃
    Supply water temp.+50℃      Supply Oil temp.+3-50℃
    Medium
    OIL                                                 Water
    Heating capacity KW
    9KW×2
    9KW×2
    9KW×2
    9KW×2
    Cooling capacity Kcal/H
    8000
    9000
    5400
    5400
    Cooling method
    Indirect cooling
    Direct Cooling
    Accuracy  of temp. control℃
    ±0.3
    Pump power HP
    1HP×2
    2HP×2
    1HP×2
    2HP×2
     Pump max. flow pressure
    50HZ/60HZ
    50L×2/min 2.6kg/cm²
    70L×2/min 2.6kg/cm²
     45L×2/min 2.6kg/cm²
    145L×2/min 2.6kg/cm²
    60L×2/min 2.6kg/cm²
    80L×2/min 2.6kg/cm²
    58L×2/min 2.6kg/cm²
    180L×2/min 2.6kg/cm²
    Oil tank capacity  L
    7L
    9L
    /
    /
    Max .power consumption KW
    9.5×2
    10.5×2
    9.5×2
    10.5×2
    Water supply pressureKg/CM²
    1MIN
    2MIN
    Cooling water pipe
    1/2″PT
    Heat water pipe  Inch
     
    4進4出至3/8″PT或1進1出至1″PT
     Dimensions L*W*H mm
     670×290×700*2
     670×290×700*2
     630×290×520*2
     670×290×700*2
    Weight     KG
    65×2
    70×2
    45×2
    55×2
Những sản phẩm khác